Thanks Steve - Both it is
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Micromesh - which kit? http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=23155 |
Page 1 of 1 |
| Author: | SteveSmith [ Tue Jul 21, 2009 12:05 pm ] |
| Post subject: | Micromesh - which kit? |
For you folks using Micromesh. I would like to get one of the kits from LMI or StewMac. Should I get the 2"x2" pads or the 3"x4" sheets? edit: I've only got one guitar to do right now. |
|
| Author: | Steve Kinnaird [ Tue Jul 21, 2009 12:20 pm ] |
| Post subject: | Re: Micromesh - which kit? |
Steve, I've used both, and each has its place. If you will be rubbing out the entire guitar, I think i'd recommend the sheets. If you are thinking mainly of spot touch-ups, then get the pads. If you are planning on another guitar after this one, get both. Steve |
|
| Author: | SteveSmith [ Tue Jul 21, 2009 1:22 pm ] |
| Post subject: | Re: Micromesh - which kit? |
Thanks Steve - Both it is
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|